• Puff Red

Puff Red

 Material Overview

CAD-CUT® Puff is the perfect HTV for creating cloud-like dimension with simple designs. With Puff, you can easily achieve a trendy dimensional look using just one layer of HTV! This material starts flat and smooth for easy cutting on your vinyl cutter and the HTV puffs up after heat application!
  • Trendy HTV with 3D puff effect
  • Appears flat when cutting, puffs when heat applied
  • Matte, textured finish & unique look
  • Best for simple or larger designs
  • 15+ available colors including neon options
 Note: Texture of Puff material can vary greatly depending upon fabric it is applied to. Repeated heat application will flatten puff effect.

 Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, matte
  • Thickness (non-puffed): 115 microns
  • Thickness (puffed): 140 microns. Only one heat application recommended.
  • Not recommended for layering
  • Washability: 25
  • Safety: CPSIA Certified
  • Laser cutter compatible
  • Application Instructions

     1-Color Application Instructions

    Time:
    8-10 seconds
    Temp:
    280°F / 138°C
    Pressure:
    Medium/Firm
    Peel:
    Hot

     Hotronix® 360 IQ™ Hat Press

    Time:
    45 seconds
    Upper:
    280°F
    Lower:
    320°F
    Pressure:
    Medium/Firm
    Peel:
    Hot
    Cover Sheet:

     Special Notes

    Puff is designed to only withstand one heat application. Repeated applications will permanently flatten the puff special effect. It is recommended that Puff be applied last when using with other materials.

     Care Instructions

    Machine wash inside-out using mild detergent. Do not use bleach. Hang dry or tumble dry low.

     Storage

    Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

     Material/Fabric Compatibility

    • 100% Cotton
    • 100% Polyester
    • Cotton/Poly Blends

     Cutter Instructions

    Cutter
    Blade
    Force
    Offset
    Speed
    Graphtec
    45°
    8-9
    0
    30cm/s
    Roland GS-24
    60°
    80-90g
    .25
    30cm/s
    Silhouette Cameo 4
    Autoblade
    6
    0
    8

    Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

    Cutting Note: Puff material carrier is matte, be sure to cut into the shiny side of the material.

Proposition 65 Warnings Website - Your right to know (ca.gov)

Write a review

Please login or register to review

Available Options