Puff Neon Orange

Material Overview

CAD-CUT® Puff is the perfect HTV for creating cloud-like dimension with simple designs. With Puff, you can easily achieve a trendy dimensional look using just one layer of HTV! This material starts flat and smooth for easy cutting on your vinyl cutter and the HTV puffs up after heat application!

Trendy HTV with 3D puff effect
Appears flat when cutting, puffs when heat applied
Matte, textured finish & unique look
Best for simple or larger designs
15+ available colors including neon options

Note: Texture of Puff material can vary greatly depending upon fabric it is applied to. Repeated heat application will flatten puff effect.

Material Specifications

Composition: Polyurethane (PU)
Carrier: Frosted, matte
Thickness (non-puffed): 115 microns
Thickness (puffed): 140 microns. Only one heat application recommended.
Not recommended for layering
Washability: 25
Safety: CPSIA Certified
Laser cutter compatible
Application Instructions
1-Color Application Instructions
Time:
8-10 seconds
Temp:
280°F / 138°C
Pressure:
Medium/Firm
Peel:
Hot
Hotronix® 360 IQ™ Hat Press
Time:
45 seconds
Upper:
280°F
Lower:
320°F
Pressure:
Medium/Firm
Peel:
Hot
Cover Sheet:
1/8" Foam Pad
Special Notes
Puff is designed to only withstand one heat application. Repeated applications will permanently flatten the puff special effect. It is recommended that Puff be applied last when using with other materials.
Care Instructions
Machine wash inside-out using mild detergent. Do not use bleach. Hang dry or tumble dry low.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
100% Cotton
100% Polyester
Cotton/Poly Blends
Cutter Instructions
Cutter
Blade
Force
Offset
Speed
Graphtec
45°
8-9
0
30cm/s
Roland GS-24
60°
80-90g
.25
30cm/s
Silhouette Cameo 4
Autoblade
6
0
8

Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Cutting Note: Puff material carrier is matte, be sure to cut into the shiny side of the material.